Input On/Off

Macro: Input

This button in the Input control dialog activates sound card operations. It is a duplicate of the the toolbar Input toggle, so you may toggle it with ALT+I at any time.

In order for Input to be successfully toggled on, either Left or Right (or both) input channels must be selected. If not, Input toggle attempts result in a message to 'Select Left and/or Right Input channel'.

Macro Notes:

Input=1 turns the Input on, as long as at least one of the Left or Right buttons are selected in the Input Control Dialog. You can insure this by always giving InL and/or InR commands before the Input command.

Input=0 turns the Input off, and Input=x toggles between on and off.