Spec Timing Mode

Controls: Gen Dlg >> Stream >> Smooth TC >> Spec
Macro: Tmode=Spec

Timing mode is set via the three-button control at the top of the Random / Step Timing Dialog.

When Timing mode is set to Spec, the samples from the Wave source ( Noise, or Arb or Play with Interpolate/Round/Step control is set to Step) proceed at the rate determined directly by the sample rate. The Timing Step Size has no effect upon the output wave, but it does affect the display by specifying a "sync" interval that will be used if Trigger is active in Gen Sync mode.

Macro Notes:

L.1.Tmode=Spec sets the Left Stream 1 Timing Mode to Spec.

See also Slow Timing Mode, Step Timing Mode, Random / Step Timing Dialog.