Timing Modulation Control (Quant, Bias, Shift)

Macros: TmQuant, TmBias, TmShift

This is a mirror of the Quant, Bias, or Shift control used to invoke this modulation dialog. For example, if you clicked the button labeled Quant to the left of its control, this will be a mirror of that control. It will still function as a normal control even if the above Mod button is toggled off.

Macro Notes:

Use the TmQuant, TmBias, or TmShift commands to change the base control as well as this mirror copy. You do not need a Quant., Bias., or Shift. prefix. For example, L.1.TmQuant=10 will set Left Stream 1 Quant to 10 directly.

Note that the value you provide for TmShift must reflect the current Smpl/sec state. To be safe, use a SmplSec command to set the desired mode before using this command.

See also Timing Modulation, Random / Step Timing Dialog, Waveform Stream Controls.