Controls: File Menu >> Juxt Dialog >> Spacing
Macro: JuxtSpc

When Array is on, this controls how far apart the traces will be spaced vertically. Higher trace numbers appear higher on the screen. If the highest traces go off the top of the screen, use a negative Offset value on the control below this to slide the array down.

The easiest way to control the spacing is with the mouse. Hold the ALT key down, then left-click and drag the traces up or down. As they move up, they will become farther apart, while down brings them closer together. ( SHIFT and drag will change the Offset.)

Separate Spacing values are maintained for waveform, Spectrum, Y-log Spectrum, and Histogram modes.

Macro Notes:

JuxtSpc only affects the Spacing value for the current mode.

JuxtSpc=25 sets Spacing directly to 25%, or whatever value is given.

JuxtSpc=>1 increases Spacing by 1%, JuxtSpc=>-1 decreases by 1%. Only +/-1 step is accepted.

• Back to Juxt Array Direction
• Ahead to Juxt Trace Offset
• Daqarta Help Contents
• Daqarta Help Index
• Daqarta Downloads
• Daqarta Home Page
• Purchase Daqarta

Questions? Comments? Contact us!