DAQARTA - STIM3A
ADVANCED STIMULUS SIGNAL GENERATOR
NOTE: The actual Daqarta STIM3A index allows you to move through it
by hitting the first letter of any entry. We apologize for
this primitive Web substitue: You may scroll through it
as usual, or select a letter from the following line, or simply use your
browser's "Find" function to search this page.
Absolute Play Rate
Adjust, DAC Components
Adjust, Digital Outputs
All, Page Mode
AM (Amplitude Modulation) Menu:
A. Depth
A. Freq, Modulator
A. On/Off
A. Phase, Modulator
A. Source
A. Sync
ARB Wave:
A. COMPOSER.S3A Setup File
A. Creating Arb Values From Text (TXT2DAT)
A. EXPNOTE.DAT Arb file
A. File 0-7 Load/Select
A. Interp / Round / Step Mode
A. Random selection of Arb values
A: Parameter, Output dB Attenuator Mode
Attenuation vs. Level Table
Attenuator, and Output dB Control
Attenuator Performance Table, ATN-SB16
Auto-Load Setup S: Parameter
BAND / GAP NOISE Menu:
B. Fall Fc
B. Rise Fc
B. Taps
B. Window
Biphasic DAC Pulses
Biphasic Pulse Level Mirror
Biphasic Pulse Width Track
Biphasic Stimuli, DigOut and DAC
Bits, DAC Resolution
Brown Noise
Buffer Size, Setting with B: Parameter
Buffer Size vs Output Samples
Buffer Size vs StepN
BURST Menu:
B. Duration
B. Dwell
B. Example - Auditory Evoked Resposes
B. Experiment - Rise/Fall vs Spectral Width
B. Fall
B. On/Off (Burst/Cont)
B. Pad
B. Rise
B. Shape
B. Start
B. Sync
B. Units (Smpls / Sec)
Burst Mode, Play Wave (Single / Repeat)
Burst, Reset On
Calibration Files, Creating with Sweep Step
Comb-Filtered Noise
Combining Wave Components, Level Considerations
Component, DAC Page Submenus
Configuration Parameters
Continuous / Burst Control
Continuous Waves with Dynamic RTime
Continuous Waves with StepN
COMPOSER.S3A Setup File
Copy / Randomize Noise Generator
Cosine Power, Burst Rise/Fall
Cycles, DigOut Pulse Train
DAC 0 or DAC 1 Activate
DAC 0 or DAC 1 Setup Menu, Entering
dB, Output Control
dB vs. Level Table
DDisk and Factor
Delay, Burst Start
Delay, Digital Output Pulse Train Start
Delay, Random Generator
Deviation (Depth), FM
Deviation, Standard (Gaussian Noise)
DEMO.ADC "Board" Driver
Depth, AM
Depth (Deviation), FM
Depth, Phase / Slope / Width Modulation
DIGITAL OUTPUT Adjust Menu:
D. Cycles, Pulse Train
D. Dwell, Pulse Train
D. High Duration
D. Introduction
D. Low Duration
D. On/Off, Bit Page
D. Pad, Pulse Train
D. Polarity
D. Start Delay, Pulse Train
D. Sync
D. Train
D. Units (Smpls / Sec)
DigOut Activate
DigOut Setup Menu, Entering
Dig Pg, Ind / Lock A
Direct Frequency Adjust Mode
Display of Stimulus Traces
Display Page, Default (View)
Distortion, Intermodulation
Distribution, Gaussian (Normal)
Distribution, Uniform
Dither Demonstration
Dual DAC Outputs
Duration, Burst
Duration, Sweep
Dwell, Burst
Dwell, DigOut Pulse Train
Dynamic / Static Mode
End Frequency, Sweep
Error, Maximum Sync (Jitter)
Experiment, Rise/Fall vs. Spectral Width
EXPNOTE.DAT Arb File
Exponent, Burst Rise/Fall Shape
Exponential Sweep
Factor, Oversampling
Factor, Sampling and DDisk
Factor, Slow Timing
Factor, Step Timing
Fall, Burst
Fall, Noise Band Fc
Features, STIM3A
File Format, Arb
File Format, Play
FM (Frequency Modulation) Menu:
F. Deviation (Depth)
F. Freq, Modulator
F. On/Off
F. Phase, Modulator
F. Source
F. Sync
FM / Swept Noise Band
Frequency, AM Sine Modulator
Frequency, FM Sine Modulator
Frequency, Phase / Slope / Width Sine Modulator
FREQUENCY, Main Wave Control Menu:
F. Freq Control
F. Phase
F. Reset on Burst
F. Reset on Sweep
F. Step Mode
F. Sync
Frequency Response, ATN-SB16 Attenuator
Frequency Response Measurement
Frequency, Step Adjustment Modes
Frequency Sweep
From, Play Wave Start Point
Frozen Noise
Gap / Band Noise
Gaussian Noise Source
Gaussian Standard Deviation Control
Gaussian Standard Deviation, Negative
Help File Omit, F: Parameter
High Duration, DigOut Pulse
HIMEM.SYS for Play Files
Histogram, Gaussian Source
Hypersampling, and Sample Factor
Independent DigOut per Page
INIT Line, Setting Buffer Size
Intermodulation Distortion
Interp / Round / Step Mode
Introduction to STIM3A
Jitter (Maximum Sync Error)
Keyboard, Organ Frequency Step Mode
Keys, Musical Note Frequencies in EXPNOTE.DAT
Level, Combining Wave Components
Level, Pulse Wave A and B
Level, Pulse Wave B Mirror
Level, Pulse Wave Zero (Baseline)
Level, Wave Component
Level, vs. Attenuation
Linear Burst Rise/Fall Shape
Linear Frequency Sweep
Lock DigOut to Page A
Low Duration, DigOut Pulse
MAIN MENU:
M. DAC Bits
M. DAC Output Toggle
M. DAC Setup
M. DigOut Setup
M. DigOut Toggle
M. Dual DAC 0
M. Dual DAC 1
M. Introduction
M. Output dB
M. Master On / Off
M. Static / Dynamic
M. Swap DACs
Master On/Off Control
Maximum Sync Error (Jitter)
Memory Buffer
Menus, Top Level
Mirror, Biphasic Pulse Level
MISCELLANEOUS Menu:
M. Factor, Oversampling
M. Freq Step Mode / Step Size
M. Load Setup
M. Save Setup
Mode Selection, Dynamic/Static and RTime/Sequential
Modulation, Component Page
Modulation Type, Pulse Wave (Phase / Width)
Modulation Type, Ramp Wave (Phase / Slope)
Modulator, Amplitude (AM)
Modulator, Frequency (FM)
Modulator, Phase / Slope / Width
Music Frequency Adjust Mode
Music Composer Setup COMPOSER.S3A
Mute, Output dB
Noise, Band FM/Sweep
Noise, Prown
Noise, Comb-Filtered
Noise, Frozen
NOISE Waves:
N. Band / Gap
N. Gaussian
N. Pink
N. White
Normal Distribution, Noise
Order, Timing Smooth / Quant
Organ Frequency Adjust Mode
Oversampling, and Sample Factor
Octave Frequency Adjust Mode
Octaves and Ratios
Output dB Control
Pad, DAC Burst
Pad, DigOut Bit Page
Page Mode: ALL, PAIR, EACH
Page Modulation
PARAMETERS, Configuration:
P. A: Attenuator Mode, Output dB
P. B: Buffer Size
P. F: Help File Omit
P. Overview
P. R: Randomize All Random Sources
P. S: Setup Auto-Load
P. Samples vs. Buffer Size
P. U: Up Scroll Preference, Output dB
Path, Arb and Play Files
Phase, AM Modulator
Phase, FM Modulator
Phase, Main (Carrier) Wave
PHASE / SLOPE / WIDTH MODULATION Menu:
P. Depth
P. Freq, Modulator
P. On/Off
P. Phase, Modulator
P. Source
P. Sync
Phase, Sweep
Pink Noise Generator
PLAY Wave Menu:
P. Burst (Single / Repeat)
P. File 0-7 Load/Select
P. From - File Ptr
P. Interp / Round / Step Mode
P. Rate (Abs/Rel)
P. To - File Ptr
P. Units (Smpls / Sec)
Polarity, DigOut Pulse
Pulse (Digital) Instead of Full Digital Output
PULSE Wave Menu:
P. 0 Level
P. A Level
P. A Width
P. B Level
P. B Width
P. Modulation Type
P. Width Adjust Mode
PWM (Pulse Width Modulation)
Quantize, Noise / Arb / Play
Quit, Prompt for Setup Save
RAMP Wave Menu:
R. Ramp Modulation (Slope / Phase)
R. Ramp Rise
R. Ramp Stairs
Random Generators
Random Selection From Arb
Randomize / Copy Noise Generator
Randomize R: Parameter
Rate, Play File Playback
Ratios and Octaves
Reset On Burst
Reset On Sweep
Revision History
Rise, Burst
Rise, Noise Band Fc
Rise, Ramp
Rise/Fall Practical Example
Rise/Fall vs. Spectral Width
Rise/Fall Shape
Round to Nearest Arb Value
Round to Nearest Play Value
Sample Factor (Oversampling)
Samples / Seconds Units
Samples vs Memory Buffer Size
Select Random Value From Arb
Setup Enter, DAC
Setup Enter, DigOut
Setup File Auto-Load
Setup File, COMPOSER.S3A Example
Setup File Load
Setup File Save
Setup Menu, DAC Component Page
Setup Menu, DigOut Bit Page
Shape, Burst Rise/Fall
Shift, Random Source Timing
Sine Wave Type
Slope Modulation - Ramp Waves
Slope Modulation, Selecting
Slow Timing Factor
Slow Timing Mode
Source, AM Modulator
Source, FM Modulator
Source, Phase / Slope / Width Modulator
Spec Mode, Timing
Spectral Line Alignment of Frequencies
Spectral Splatter and Rise/Fall, Experiment
Speed, CPU vs. Sample Rate
Square Wave Type
Staircase Wave
Standard Deviation, Gaussian Noise
Start, Burst Delay
Start, Digital Output Pulse Train Delay
Start Frequency, Sweep
Static / Dynamic Mode
Step Mode, Arb Wave
Step Mode, Play Wave
Step Mode, Sweep
Step Size, Sweep
Step Timing Factor
Step Timing Mode
StepHz Frequency Adjust Mode
StepN Frequency Adjust Mode
Sustain (Duration), Burst
Swap DAC Outputs
SWEEP Menu:
S. Duration
S. End Freq
S. Lin/Exp/Step
S. On/Off
S. Reset Sync
S. Start Freq
S. Step Size
S. Sync
S. Units (Smpls / Sec)
Sweep, Reset On
Swept / FM Noise Band
SYNC Menu:
S. DigOut Page
S. Display Mode
S. MaxErr (Dynamic RTime)
S. Page
S. Page Mode
S. Pulse Out, Digital
S. View Page
Sync, AM
Sync, Burst
Sync, DigOut Bit
Sync, FM
Sync, Main (Carrier) Freq
Sync, Noise Waves (Timing Step)
Sync, Phase / Slope / Width Modulation
Sync, Sweep Frequency
Taps, Noise Band
Text-to-DAT File Utility (TXT2DAT)
Tilt, Pink Noise Slope Correction
Time Limit, Unregistered Users
TIMING Menu:
T. Order, Smooth - Quantize
T. Quantize
T. Randomize / Copy
T. Shift Random Source
T. Slow Factor
T. Slow Mode
T. Smooth TC
T. Spec Mode
T. Step Factor
T. Step Mode
T. Units (Smpls / Sec)
To, Play Wave End Point
Top-Level Menus (Main, Sync, Misc)
Track, Biphasic Pulse Width
Train, Digital Output Pulse
Triangle Wave Type
Triangular Distribution, Noise
Trigger Pulse Output
Uniform Distribution, Noise
Units (Smpls / Sec)
View, Default Display Page
.WAV Files, Arb
.WAV Files, Play
WAVE Menu:
W. Arb
W. Band, Noise
W. Gauss Noise
W. Noise - General
W. Pink Noise
W. Play File
W. Pulse, Mono / Biphasic
W. Ramp / Staircase
W. Sine
W. Square
W. Triangle
W. White Noise
Width Adjust Mode, Pulse Wave
Width Modulation
Width, Pulse Wave A and B
Width, Pulse Wave B Tracking
Window Function, Compared to Burst Shape
Window Function, Using With Sweep
Window, Noise Band
XMS (Extended Memory System) for Play Files
|