Data AcQuisition And Real-Time Analysis
Scope - Spectrum - Spectrogram - Signal Generator
Software for Windows
Science with your Sound Card!
The following is from the Daqarta Help system:



Spectrum Analyzer

Signal Generator

(Absolutely FREE!)


Pitch Tracker


DaqMusiq Generator
(Free Music... Forever!)

Engine Simulator

LCR Meter

Remote Operation

DC Measurements

True RMS Voltmeter

Sound Level Meter

Frequency Counter
    Spectral Event

    MHz Frequencies

Data Logger

Waveform Averager


Post-Stimulus Time
Histogram (PSTH)

THD Meter

IMD Meter

Precision Phase Meter

Pulse Meter

Macro System

Multi-Trace Arrays

Trigger Controls


Spectral Peak Track

Spectrum Limit Testing

Direct-to-Disk Recording



Frequency response

Distortion measurement

Speech and music

Microphone calibration

Loudspeaker test

Auditory phenomena

Musical instrument tuning

Animal sound

Evoked potentials

Rotating machinery


Product test

Contact us about
your application!

Voice Pattern Copy / Paste

This is a small button marked with a C, just to the left of the Voice Pattern Scroll arrows below the "Patterns" label.

This button allows you to copy or paste all three Patterns at the same time: Velocity, Note, and Chord.

Clicking the button while holding down the CTRL key will copy all three patterns to the Windows Clipboard. Each pattern will be copied as a separate line of text.

Clicking the button while holding down the ALT key will first clear all three patterns, and then paste the contents of the Clipboard into them. The first line of text will go to Velocity, the second to Notes, and the third to Chords. If only two lines of text are in the Clipboard, they will go to Velocity and Notes.

Alternatively, SHIFT plus click will simply clear all three patterns, convenient if you want to start over with manual entry.

The Copy / Paste feature is particularly useful when you have a complete song entered, and you want to copy it to additional voices. The new voices can have different instruments as well as other parameters such as Note Lag or Chord Arpeggio. You can also modify their patterns as desired.

Another use for Copy / Paste is to maintain a collection of songs or parts of songs in a separate text file. Then you can easily copy what you want into a new creation.

For example, you may want to create a setup with two separate songs. Only one song is active; the other just sits there with its voice(s) off. Then every now and then your Changes script selects one note position at random and uses Buffer Copy commands to replace that position in the active song with the corresponding note (and velocity and chord) from the inactive song. This will cause the first song to morph into the second.

See also Voice Pattern Overview, Velocity Pattern, Note Pattern, Chord Pattern, MIDI Voice Setup Dialogs, Pitch-to-MIDI dialog, Pitch Track Toolbox - Overview


Questions? Comments? Contact us!

We respond to ALL inquiries, typically within 24 hrs.
Over 35 Years of Innovative Instrumentation
© Copyright 2007 - 2023 by Interstellar Research
All rights reserved