Data AcQuisition And Real-Time Analysis
Scope - Spectrum - Spectrogram - Signal Generator
Software for Windows
Science with your Sound Card!
The following is from the Daqarta Help system:



Spectrum Analyzer

Signal Generator

(Absolutely FREE!)


Pitch Tracker


DaqMusiq Generator
(Free Music... Forever!)

Engine Simulator

LCR Meter

Remote Operation

DC Measurements

True RMS Voltmeter

Sound Level Meter

Frequency Counter
    Spectral Event

    MHz Frequencies

Data Logger

Waveform Averager


Post-Stimulus Time
Histogram (PSTH)

THD Meter

IMD Meter

Precision Phase Meter

Pulse Meter

Macro System

Multi-Trace Arrays

Trigger Controls


Spectral Peak Track

Spectrum Limit Testing

Direct-to-Disk Recording



Frequency response

Distortion measurement

Speech and music

Microphone calibration

Loudspeaker test

Auditory phenomena

Musical instrument tuning

Animal sound

Evoked potentials

Rotating machinery


Product test

Contact us about
your application!

Juxt Trace Select

Controls: File Menu >> Juxt Dialog >> Trace
Macro: JuxtSel

This is both a toggle button and a status indicator.

When this button is depressed, the Array button above it pops out and only the trace indicated on the button is shown.

When Array is active, this button indicates which trace is Selected and therefore highlighted. The button label reflects the selected Label Field for that trace.

You can change the Selected trace via the scroll arrows next to this button, or by left-clicking on the desired trace in the Array display.

When a trace is Selected, main Daqarta controls show values associated with that trace, including Averager and Trigger settings, Notes, Labels, Fields, and cursor readouts. You can change Notes, Labels, and Fields at any time and the changes will be made to the memory image of that trace. Other values such as Averager and Trigger settings can not be changed, because they are the actual settings that were originally used to create that trace.

Note that when a Juxt trace is being displayed, active data display is automatically suspended via the Pause button. You must toggle the trace off before you can unPause to return to active data display.

Macro Notes:

JuxtSel=1 activates the Select state, JuxtSel=0 forces it off, and JuxtSel=x toggles it.

See also Juxt Trace Memory Array


Questions? Comments? Contact us!

We respond to ALL inquiries, typically within 24 hrs.
Over 35 Years of Innovative Instrumentation
© Copyright 2007 - 2023 by Interstellar Research
All rights reserved