Trigger Auto Mode

Controls: Trigger Dialog >> Auto
Macro: TrigMode=Auto

In Auto Trigger mode, the trigger logic waits for the specified Slope and Level before beginning a frame. However, if a suitable trigger event doesn't arrive within 1024 samples, then the display is updated anyway. This is useful to let you see if the signal has dropped out entirely, for example.

Macro Notes:

TrigMode=Auto or TrigMode=0 sets the mode to Auto. You can use either mnemonic names or numeric values (or variables or expressions) for setting, reading, or IF testing:

    0 = Auto
    1 = ALevel
    2 = Norm
    3 = GenSync

Note that if you use a name instead of a value in an IF test, it must be in quotes: IF.TrigMode="Auto".

See also Trigger Toggle - Introduction, Trigger Control Dialog