Data AcQuisition And Real-Time Analysis
Scope - Spectrum - Spectrogram - Signal Generator
Software for Windows
Science with your Sound Card!
The following is from the Daqarta Help system:



Spectrum Analyzer

Signal Generator

(Absolutely FREE!)


Pitch Tracker


DaqMusiq Generator
(Free Music... Forever!)

Engine Simulator

LCR Meter

Remote Operation

DC Measurements

True RMS Voltmeter

Sound Level Meter

Frequency Counter
    Spectral Event

    MHz Frequencies

Data Logger

Waveform Averager


Post-Stimulus Time
Histogram (PSTH)

THD Meter

IMD Meter

Precision Phase Meter

Pulse Meter

Macro System

Multi-Trace Arrays

Trigger Controls


Spectral Peak Track

Spectrum Limit Testing

Direct-to-Disk Recording



Frequency response

Distortion measurement

Speech and music

Microphone calibration

Loudspeaker test

Auditory phenomena

Musical instrument tuning

Animal sound

Evoked potentials

Rotating machinery


Product test

Contact us about
your application!

Percussion Pan Position

Controls: Sgram/PT Dialog >> Pitch-to-MIDI >> Percussion Setup
Changes: PP=n
Macro: MIDIpanP

The Percussion Pan control appears at the top of the Percussion Setup dialog, and near the bottom of the main Pitch-to-MIDI dialog.

The Percussion Pan value defaults to 0 (Center), and may range from -64 (full Left) to +63 (full Right).

This control affect all Percussion Instruments equally. This is a MIDI "feature" since it handles all percussion instruments as different "notes" of a single MIDI voice (MIDI Voice 10).

The Pan Scan, Pan Wrap, and Pan Beat controls allow automated motion of the Pan position, or you can set it directly via Changes script commands.

MIDI Changes Script:

PP=n sets the Percussion Pan Position to the value of n, which may be any signed integer or valid expression, including current MIDI control values, random values, current computer keyboard states or mouse position, input or buffered notes, oscillators, and User Variables. Values will be limited to the range of -64 (Left) to +63 (Right).

See the Voice Pan Position topic for a discussion of how to use a Changes script to move the position in a sinusoidal manner.

Macro Notes:

MIDIpanP=64 sets the Percussion Pan Position to 64. MIDIpanP=>1 increments the current Percussion Pan Position by one, while MIDIpanP=>-1 decrements it.

However, Changes scripts are recommended for this purpose.

See also Percussion Setup Dialog Pitch-to-MIDI dialog, Pitch Track Toolbox - Overview, Spectrogram / Pitch Track Controls, Spectrogram / Pitch Track (Sgram/PT)


Questions? Comments? Contact us!

We respond to ALL inquiries, typically within 24 hrs.
Over 35 Years of Innovative Instrumentation
© Copyright 2007 - 2023 by Interstellar Research
All rights reserved