Data AcQuisition And Real-Time Analysis
Scope - Spectrum - Spectrogram - Signal Generator
Software for Windows
Science with your Sound Card!
The following is from the Daqarta Help system:



Spectrum Analyzer

Signal Generator

(Absolutely FREE!)


Pitch Tracker


DaqMusiq Generator
(Free Music... Forever!)

Engine Simulator

LCR Meter

Remote Operation

DC Measurements

True RMS Voltmeter

Sound Level Meter

Frequency Counter
    Spectral Event

    MHz Frequencies

Data Logger

Waveform Averager


Post-Stimulus Time
Histogram (PSTH)

THD Meter

IMD Meter

Precision Phase Meter

Pulse Meter

Macro System

Multi-Trace Arrays

Trigger Controls


Spectral Peak Track

Spectrum Limit Testing

Direct-to-Disk Recording



Frequency response

Distortion measurement

Speech and music

Microphone calibration

Loudspeaker test

Auditory phenomena

Musical instrument tuning

Animal sound

Evoked potentials

Rotating machinery


Product test

Contact us about
your application!

Percussion Level (Volume)

Controls: Sgram/PT Dialog >> Pitch-to-MIDI >> Percussion Setup
Changes: LP=n
Macro: MIDIlevP

The Percussion Level (volume) control appears at the top of the Percussion Setup dialog, and also near the bottom of the main Pitch-to-MIDI dialog.

This control adjusts the overall balance of the total Percussion sound relative to individual tonal instrument Voice Levels within a performance.

Levels may be set to values between 0 and 127; the default is 64.

Use the separate Percussion Velocity controls to set the relative volumes of individual Percussion Instrument sounds.

Use the MIDI Volume or Master Volume controls to adjust the overall performance volume.

MIDI Changes Script:

LP=n sets Percussion Level to the value of n, which may be any unsigned integer or expression, including current MIDI control values, random values, current computer keyboard states or mouse position, input or buffered notes, oscillators, and User Variables. It will be limited to the range of 0 to 127.

For example, LP=64 sets the Percussion Level to 64.

Macro Notes:

MIDIlevP=64 sets the Percussion Level to 64. MIDIlevP=>1 increments the current Percussion Level by one, while MIDIlevP=>-1 decrements it.

However, Changes scripts are recommended for this purpose.

See also Percussion Setup Dialog Pitch-to-MIDI dialog, Pitch Track Toolbox - Overview, Spectrogram / Pitch Track Controls, Spectrogram / Pitch Track (Sgram/PT)


Questions? Comments? Contact us!

We respond to ALL inquiries, typically within 24 hrs.
Over 35 Years of Innovative Instrumentation
© Copyright 2007 - 2023 by Interstellar Research
All rights reserved